Remote control

• With Mobile/Internet application PROTEGUS 2.
• With SMS messages.
• With phone call.

Messages for users

• Sends messages about events to the PROTEGUS 2 application or with text SMS messages.

Messages for the safety company

• Sends event information in Contact ID codes to TRIKDIS software and hardware receivers, which work with any monitoring software.
• Can simultaneously send event messages to the receiver of the safety company and work with the PROTEGUS 2 app.
• If connection with the main receiver is lost, the messages are automatically sent to a backup receiver.

Inputs and outputs

• 2 inputs (IN), of selectable type: NO; NC; EOL.
• 2 universal inputs/outputs. Mode of operation is set as either input or output.
• 1 output (OUT) – relay.

Settings and installation

• Quick and easy installation.
• Addition of new users and deletion of existing users can be done with the PROTEGUS 2 app (when logged in with administrator rights), SMS message, TrikdisConfig
• Device can be configured either by connecting a USB Mini-B cable or remotely with the TrikdisConfig
• Remote updating of firmware.
• Two access levels for configuring the device, for the installer and for the administrator.

Specifications

GSM: 900/1800MHzPower supply voltage9-32 V DC

12-24 V AC

Current consumption60-100 mA (on standby)

Up to 250 mA (while sending data)Inputs2, selectable type: NC, NO, EOL=10 kΩUniversal inputs/outputs2, can be set either as input IN with type: NC, NO, EOL=10 kΩ, or output OUT (open collector (OC) 50 mA)Output1, relay, 1 A 30 V DC, 0,5 A 125 V ACUnsent events memoryUp to 60 eventsEvent log memoryUp to 5000 eventsUsers who receive messages and have permission to control7Users who have permission to control990Operating environmentTemperature from –20 °C to +50 °C, relative humidity – up to 80% at +20 °CDimensions92 x 62 x 26 mmWeight80 g